Filter
Top Products
100 Appendix A: BIOS reference
Exit menu
This section describes all the items of the Exit menu. Refer to the section entitled
The Legend bar for navigation guidelines.
•Exit Saving Changes.
Choose this option to save your changes in CMOS memory and exit the BIOS
Setup utility.
Before exiting, a Setup Confirmation dialog box will appear, allowing you to
confirm that the changes made should be saved. Using the Space key or the Left
and Right keys, select either Yes or No, and press Enter to continue. You can also
press Esc to return to the Exit menu.
• Exit Discarding Changes.
Choose this option to discard your changes and exit the BIOS Setup utility.
If configuration changes have been made, a Setup Warning dialog box will appear,
allowing you to confirm that the changes made should not be saved. Using the
Space key or the Left and Right keys, select either Yes or No, and press Enter to
continue. You can also press Esc to return to the Exit menu.
Important If you select No, all the changes made in the BIOS Setup utility will be discarded.
• Load Setup Defaults.
Choose this option to load the default configuration into the Setup utility. This
will replace each Setup item with its default value. These values are stored in
CMOS memory. Once loaded, the Exit menu will remain open.
Before loading, a Setup Confirmation dialog box will appear, allowing you to
confirm that you have chosen to load your default configuration. Using the Space
key or the Left and Right keys, select either Yes or No, and press Enter to continue.
You can also press Esc to return to the Exit menu.
MATROX IMAGING est distribué par TECHWAY - www.techway.fr - info@techway.fr - +33 (0)1 64 86 58 30