Filter
Top Products
Pinouts of internal connectors and dip switches 137
Internal connector for the parallel interface
The internal connector for the parallel interface is a 26-pin, IDC male connector.
The pinout of this connector is outlined in the following table:
Pin Signal I/O Description
1/STROBEOStrobe.
2 /AUTOFD O Autofeed.
3 D0 O Data Bit 0.
4 /ERROR I Error.
5 D1 O Data Bit 1.
6 /INIT O Initialize.
7 D2 O Data Bit 2.
8 /SELIN O Select In.
9 D3 O Data Bit 3.
10 GND - Ground.
11 D4 O Data Bit 4.
12 GND - Ground.
13 D5 O Data Bit 5.
14 GND - Ground.
15 D6 O Data Bit 6.
16 GND - Ground.
17 D7 O Data Bit 7.
18 GND - Ground.
19 /ACK I Acknowledge.
20 GND - Ground.
21 BUSY I Busy.
22 GND - Ground.
23 PE I Paper end.
2
26
25
1
DIMM memory side
MATROX IMAGING est distribué par TECHWAY - www.techway.fr - info@techway.fr - +33 (0)1 64 86 58 30