MaxNAS Owner’s Manual
25
3.2 LAN2 Configuration
The LAN Configuration screen for the LAN2 (“LAN”) Interface allows for the following controls:
The following table lists the menu items on the LAN2 (“LAN”) Configuration page:
MAC Address This eld displays the MAC address of the LAN port
Jumbo Frame Support Like WAN, this port also supports Jumbo Frames. (For more information about Jumbo
Frames see section 4.1.1)
IP Address LAN2 port requires static addressing, and
does not support DHCP.
Netmask This is where you assign a new subnet mask
Gateway This is where you assign a new gateway
Link Detected This indicates whether or not the link to your network is currently live
Link Speed This eld displays the current speed of your LAN 1 network link.
DHCP Conguration The MaxNAS R8 can act as your DHCP server. To enable this feature simply click
enable and assign a range for the DHCP server to work within.
3.3 Network Services Configuration
The MaxNAS R8 offers the following network services:
• SMB/CIFS (Server Message Block) or “Windows” Networking
• Web Access Control
• UPNP (Universal Plug and Play) automatic detection and configuration
• Apple File Protocol Service
• NFS Service • (S)FTP Service
• Synchronization Services • DLNA Streaming
Note: The MaxNAS R8 web interface
will not allow you to assign an IP
within the same subnet to both ports
3-Administering the MaxNAS R8