Filter
Top Products
CDM-570/570L Satellite Modem with Optional IP Module Revision 4
Front Panel Operation MN/CDM570L.IOM
6–57
The user is shown the time and date stamp of the previously stored configuration, for
identification purposes.
Select the location where the current configuration will be stored, using the
▲ ▼ arrow
keys, then press ENTER. Locations 0 through 9 are available.
If the selected location does not contain a previously stored configuration, the following
screen is displayed:
Pressing ENTER or CLEAR will take the user back to the previous menu.
If, however, the selected location contains a previously stored configuration, the
following screen is displayed:
Select No or Yes using the
◄ ► arrow keys, then press ENTER.
Selecting Yes will overwrite the existing configuration at the selected location.
6.17.2 (SAVE/LOAD) LOAD
Having selected Load, if there is a configuration stored at the selected location the
following screen will be displayed:
Note the data and time stamp identifying the stored configuration.
If the selected location contains no data, the following screen will be displayed:
Select the location to load a configuration from, using the
▲ ▼ arrow keys, then press
ENTER. Locations 0 through 9 are available.
Your Configuration has
been Saved to Loc 9 (ENT)
Loc 9 Contains Data!
Overwrite? NO YES (
◄
►)
Load Config from Loc: 9
11:10:29 23/12/03 (▲ ▼)
Load Config from Loc 9
Empty (▲ ▼)
Save Config to Loc: 9
11:10:29 23/12/03 (▲ ▼)