Filter
Top Products
CDM-570/570L Satellite Modem with Optional IP Module Revision 4
Serial Remote Control MN/CDM570L.IOM
13–8
Parameter
Type
Command
(Instruction
Code and
Qualifier)
Arguments
for Command
or Response
to Query
Description of Arguments
Response to
Command
Query
(Instruction
Code and
Qualifier)
Response to Query
Tx Frequency TFQ= 9 bytes Command or Query.
Tx Frequency
CDM-570L: 950 to 1950 MHz
CDM-570: 50 to 90 and 100 - 180 MHz
Resolution=100 Hz
Example: TFQ=0950.9872
Example: TFQ=0073.4528
TFQ=
TFQ?
TFQ*
TFQ#
TFQ? TFQ=xxxx.xxxx
(see description of
arguments)
Tx FEC Type TFT= 1 byte, value
of 0 thru 6
Command or Query.
Tx FEC coding type, where:
0=None (uncoded - no FEC) (Forces TCR=7 1/1) with
differential encoding ON
1=Viterbi
2=Viterbi + Reed-Solomon
3=Reserved – do not use
4= Reserved – do not use
5=TCM + Reed-Solomon (Forces TCR=3 2/3)
6=Turbo
7= TPC/LDPC (Future option)
Example: TFT=1 (which is Viterbi coding)
TFT=
TFT?
TFT*
TFT#
TFT+
TFT? TFT=x
(see description of
arguments)
Tx
Modulation
Type
TMD= 1 byte, value
of 0 thru 5
Command or Query.
Tx Modulation type, where:
0=BPSK
1=QPSK
2=OQPSK
3=8PSK
4=16-QAM (Turbo or Viterbi + RS only)
5=8-QAM (Future option)
Depending on FEC type, not all of these selections will be valid.
Example: TMD=2 (which is OQPSK)
TMD=
TMD?
TMD*
TMD#
TMD+
TMD? TMD=x
(see description of
arguments)