Filter
Top Products
CDM-570/570L Satellite Modem with Optional IP Module Revision 4
IP Module - CLI and Telnet Operation MN/CDM570L.IOM
Menu Options/Fields Entry Description
SNMP
N
Toggles [Enabled] and [Disabled]
Enabled tells the
IP Module to respond to SNMP
requests against the private and public MIB.
Disabled tells the
IP Module not to respond to SNMP
requests against the private and public MIB.
IGMP
I
Toggles [Enabled] and [Disabled]
The receive portion of a
IP Module will utilize the IP
M
odule as an IGMP server. The transmit portion of a IP
M
odule will utilize the IP Module as an IGMP client.
The IGMP Information Page configures the
IP Module
to report an interest to join a Multicast group on an
IGMP server. The IGMP protocol is used to regulate
Multicast traffic on a LAN segment to prevent
information of no interest from consuming bandwidth on
the LAN.
Downlink Route All
Available Multicast
M
Toggles [Enabled] and [Disabled]
Enabled tells the
IP Module to route all Multicast
packets coming from the Satellite interface to the
Ethernet LAN regardless of the Route Table entries.
Disabled tells the
IP Module not to automatically
forward all Multicast packets. This
IP Module will only
forward multicast traffic received from the satellite to the
Ethernet port if the multicast route exists in the Route
Table.
Quality of Service (QoS)
Q
Toggles [Enabled] and [Disabled].
This feature must be purchased.
Enabled tells the
IP Module to apply configured QoS
rules on all packets going out the Satellite Interface.
When Disabled the
IP Module does not apply QoS
rules for outgoing packets.
Transmit 3xDES Encryption
T
Toggles [Enabled] and [Disabled]
This feature must be purchased.
Enabled allows the
IP Module to assign a TX key to
encrypt packets for a specific route being sent over the
Satellite Interface.
When Disabled the
IP Module cannot encrypt packets
being sent over the Satellite interface.
17–11