Filter
Top Products
Page 15 of 54 MN/CDM570L.AA4
21
Parameter
Type
Command
(Instruction
Code and
Qualifier)
Arguments
for Command
or Response
to Query
Description of Arguments
Response to
Command
Query
(Instruction
Code and
Qualifier)
Response to Query
Enable/Disable
QoS Feature
QSE= 1 byte value
0 – Disable
1 – Enable
Command or Query.
Setting this to ‘1’ enables the Quality of Service feature.
Setting to ‘0’ disables it.
QSE=
QSE!
QSE? QSE=x
System
Configuration
Get
None String of
Variable byte
size
Query only.
Querying the SCG? Dumps the system configuration. This can be
used for updating the GUI parameters. See the Appendix section
for more information on individual field.
SCG=
SCG!
SCG? SCG= string of variable
byte size.
3.4.2 Interface Commands
Parameter
Type
Command
(Instruction
Code and
Qualifier)
Arguments
for Command
or Response
to Query
Description of Arguments
Response to
Command
Query
(Instruction
Code and
Qualifier)
Response to Query
Ethernet MAC NONE 12 bytes Query only.
Returns the Ethernet MAC address, format:
Example: ETM=0006B0000178
ETM! ETM? ETM=xxxxxxxxxxxx
(see description of
arguments)
Ether speed
mode
ESM= 1 byte, value
of 1..5
Command or Query.
1 -- Auto
2 -- 10 MB/sec Half Duplex
3 -- 100 MB/sec Half Duplex
4 -- 10 MB/sec Full Duplex
5 -- 100 MB/sec Full Duplex
Specifies the speed and mode of Ethernet interface.
ESM =
ESM!
ESM? ESM = x
(see description of
arguments)