Filter
Top Products
Page 15 of 54 MN/CDM570L.AA4
45
3.4.9.4 QoS Stats
Parameter
Type
Command
(Instruction
Code and
Qualifier)
Arguments
for Command
or Response
to Query
Description of Arguments
Response to
Command
Query
(Instruction
Code and
Qualifier)
Response to Query
Quality of
Service
Statistics Get
N/A String of QoS
Stats
Query only.
Displays the QoS queue statistics of all active queues.
nnn|pp|aaaaaaaaaa|bbbbb|cccccccccc|dddddddddd|eeeeeeeeee|fffff|g
gggg|hhhhh|iiii
n – QoS Rule Number
p – Protocol number [Refer to QSR]
a – Sent Packets
b – Pkts per Second
c – Sent Bytes
d – Dropped Packets
e – Dropped Bytes
f – Current Transmit Rate [Kbps]
g – Average Transmit Rate [Kbps]
h – Maximum Transmit Rate [ Kbps]
I – Active Flow count associated with this QoS Queue.
>0001/QST=
0|19| 0| 0| 0| 0| 0| 0| 0| 0| 0chr(13)
1| 0| 0| 0| 0| 0| 0| 0| 0| 0| 0chr(13)
QST! QST? QST=sssssssss…
String displaying qos
stats of all active queues.
\r – CR – 0x0D
\n – Newline – 0x0A
Quality of
Service Stats
Clear
QSC=xx
xx = qos
rule index
xx – qos rule
index for
which to clear
stats.
Command only.
Clears the QoS statistics for a specified queue. The command can
be issued only on active/configured queue. To clear default queue
stats use ‘0’.
<1/QSC=0 will clear default queue stats
<1/QSC=5 will clear stats of rule-5.
QSC=
QSC!
None QSC=xx
(see description of
argument)
Clear All QoS
Queue
Statistics
QSA= QSA=x
1 – Clear all
stats
Command only.
Setting QSA=1 will clear all qos queue statistics. Also clears the
default queue stats.
QSA=
QSA!
None QSA=x
(see description of
argument)