Filter
Top Products
Page 14 of 54 MN/CDM570L.AA4
Parameter
Type
Command
(Instruction
Code and
Qualifier)
Arguments
for Command
or Response
to Query
Description of Arguments
Response to
Command
Query
(Instruction
Code and
Qualifier)
Response to Query
Number of
QOS Rule
entries
QSN QSN=2 bytes
numerical
Query Only.
Returns the number of active qos rules. Doesnot count default rule.
Note: This command should be issued whenever a new rule is
added/deleted.
QSN =
QSN?
QSN? QSN = xxx
(see description of
arguments)
Delete a QOS
Rule entry
QSD= QSD =2bytes,
numerical
Command Only.
Deletes the QoS rule entry at the specified index number
Example: QSD=3 (deletes the 3
rd
qos rule)
QSD =
QSD!
N/A
QSD = xx
(see description of
arguments)
QoS Typical
System
Latency
QTL= 1-Byte value
0 – 5 Seconds.
Command or Query
Sets/Gets the QoS typical system latency
At low datarates of upto 1Mbps this value can range from 0 – 5
Seconds..
At datarates above 1Mbps, the value range from 0 – 2 Seconds.
QTL =
QTL!
QTL? QTL=x
X – A value of 0-5
Seconds.
QoS
Maximum
System
Latency
QML= 1-Byte value
0 – 5000 milli
Seconds.
Query
Gets the QoS typical system latency
Value range from 0 – 5000 milli Seconds.
QML =
QML!
QML? QML=x
X – A value of 0-5000
milli Seconds.