Filter
Top Products
CDM-570/570L Satellite Modem with Optional IP Module Revision 4
IP Module - CLI and Telnet Operation MN/CDM570L.IOM
Menu Options/Fields Entry Description
3xDES Configuration
D
The 3xDES Configuration Page allows the user to
determine if 3xDES encryption is enabled on a device
and if so, the 3xDES keys that are used to decrypt
traffic. The keys specified for the transmit function are
completely independent for the 3xDES keys specified
for the receiver function.
SMTP Configuration
M
The SMTP configuration page allows the user to
specify appropriate settings for SMTP email server.
SNMP Configuration
N
The SNMP configuration page allows the user to
specify management parameters for SNMP.
Working Mode
C
Used to set the Working Mode to:
Router – Small Network
Router – Large Network
Router – Point to Point
Router – Vipersat
easyConnect™
See Chapter 15 for additional information.
easyConnect™ Multicast
Option
E
When unit is running in easyConnect™ mode, multicast
is only forwarded across link if both units have this
feature enabled.
Header comp refresh rate
(in pkts) for UDP/RTP1
H
This setting allows for the adjustment of how often to
send a full header of this type of traffic when Header
Compression is enabled.
Header comp refresh rate
(in pkts) for UDP
U
This setting allows for the adjustment of how often to
send a full header of this type of traffic when Header
Compression is enabled.
Header comp refresh rate
(in pkts) for all others
O
This setting allows for the adjustment of how often to
send a full header of this type of traffic when Header
Compression is enabled.
Payload comp refresh rate
(in pkts)
Q
This setting allows for the adjustment of how often to
send a full payload when Payload Compression is
enabled.
Telnet Timeout
T
The Telnet timeout determines how many minutes (1-
60) of Telnet inactivity before the Telnet session is
automatically terminated.
Save Parameters
S
This option allows a user to save the current
configuration to permanent storage. This configuration
will be restored on each successive power cycle.
Exit
X
This option allows a user to exit the current menu and
return to its parent menu.
17–6