Filter
Top Products
CDM-570/570L Satellite Modem with Optional IP Module Revision 4
Serial Remote Control MN/CDM570L.IOM
13–28
Parameter
Type
Command
(Instruction
Code and
Qualifier)
Arguments
for Command
or Response
to Query
Description of Arguments
Response to
Command
Query
(Instruction
Code and
Qualifier)
Response to Query
BUC Address BAD= 2 byte, value
of 01 to 15
Command or Query. CDM-570L Only
Indicates the BUC Address, in the form: xx, where xx is between
01 and 15.
Example: BAD=03
BAD =
BAD?
BAD *
BAD #
BAD? BAD=xx
(see description of
arguments)
BUC Comms
enable
BCE= 1 byte, value
of 0 or 1
Command or Query. CDM-570L Only
Enables or disables communications, via the FSK link, with an
externally connected Block Up Converter (BUC), where:
0=Disabled
1=Enabled
Example: BCE=0 (Disabled)
BCE=
BCE?
BCE*
BCE#
BCE? BCE=x
(see description of
arguments)
BUC Power
Control
BPC= 1 byte, value
of 0 or 1
Command or Query. CDM-570L Only
0=Disable BUC DC Power
1=Enable BUC DC Power
Example: BPC=0 (BUC DC power disabled)
BPC=
BPC?
BPC*
BPC#
BPC? BPC=x
(see description of
arguments)
BUC 10 MHz
Reference
BFR= 1 byte, value
of 0 or 1
Command or Query. CDM-570L Only
Enables or disables the 10 MHz frequency reference to the BUC
0 = Disabled
1 = Enabled
Example: BFR=0 (BUC 10MHz reference disabled)
BFR=
BFR?
BFR*
BFR#
BFR? BFR=x
(see description of
arguments)
BUC Output
Enable
BOE= 1 byte, value
of 0 or 1
Command or Query. CDM-570L Only
Indicates BUC Output enable,
0 = Off (output disabled)
1 = On (output enabled)
Example: BOE=1 (BUC output is enabled)
BOE=
BOE?
BOE*
BOE#
BOE? BOE=x
(see description of
arguments)
BUC High
Current Limit
BCH= 4 bytes Command or Query. CDM-570L Only
BUC High Current Limit, a value between 500 and 4000 mA
Example: BCH=3100
BCH=
BCH?
BCH*
BCH#
BCH? BCH=xxxx
(see description of
arguments)
BUC Low
Current Limit
BCL= 4 bytes Command or Query. CDM-570L Only
BUC Low Current Limit, a value between 0 and 3000 mA
Example: BCL=0600
BCL=
BCL?
BCL*
BCL#
BCL? BCL=xxxx
(see description of
arguments)