Multi-Tech Systems MVP210/410/810-FX Server User Manual


 
Chapter 6: Using the Software
Multi-Tech Systems, Inc. 133
Figure 6-43: Java install screen
During the installation, you must specify which browser you’ll use in the Select Browsers screen.
Figure 6-44: Browser choice
When installation is complete, the Java program runs automatically in the background as a plug-in supporting the
MultiVOIP web interface. No user actions are required.
After the Java program has been installed, you can access the MultiVOIP using the web browser interface. Close
the MultiVOIP Windows interface. Start the web browser. Enter the IP address of the MultiVOIP unit. Enter a
password when prompted. (A password is needed here only if password has been set for the local Windows
interface or for the MultiVOIP’s FTP Server function. See “Setting a Password -- Web Browser interface” earlier
in this chapter.) The web browser interface offers essentially the same control over the VOIP as can be achieved
using the Windows interface. As noted earlier, logging functions cannot be handled via the web interface. And,
because network communications will be slower than direct communications over a serial PC cable, command
execution will be somewhat slower over the web browser interface than with the Windows interface.