Filter
Top Products
G
ETTING
S
TARTED
1.19
1
Power Save Mode
Power Save mode allows your machine to reduce power consumption when
it is not in actual use. You can turn this mode on by selecting the length of
time for which the machine waits after a job is printed before it switches to
a reduced power state.
1
Press Menu until “Machine Setup” appears on top line of the display.
2
Press the scroll button (¥ or )
until “Power Save” appears on the
bottom line. Press Enter.
3
Press the scroll button (¥ or ) to display “On” on the bottom line and
press Enter.
Selecting “Off” means that the power save mode turns off.
4
Press the scroll button (¥ or ) until the time settings you want
appears.
The available options are 5, 10, 15, 30 and 45 (minutes).
5
Press Enter to save the selection.
6
To return to Standby mode, press Stop/Clear.
Setting Up the Fax System
Your machine has various user-selectable fax setup options. These options
are preset at the factory, but you may need to change them.
1
Press Menu until “Fax Setup” appears on the top line of the display.
The first available menu item, “Ring to Answer,” displays on the
bottom line.
2
Press the scroll button (¥ or ) until the menu item you want on the
bottom line and press Enter.
3
Use the scroll button (¥ or ) to find the status or use the number
keypad to enter the value for the option you have selected.
4
Press Enter to save the selection.
5
If necessary, repeat steps 2 through 4.
6
To return to Standby mode, press Stop/Clear.