Filter
Top Products
B
ASIC
F
UNCTIONS
2.4
Sending a Fax Automatically
1
Load the document(s) face down into the ADF.
For details about loading a document, see page 2.2.
2
Adjust the document resolution to suit your fax needs. See page 2.3.
If you need to change the darkness, see page 1.20.
3
Enter the remote fax phone number using the number keypad.
You can use the one-touch keypad or speed or group dial numbers. For
details about storing a number, see page 2.16.
4
Press Start Copy/Fax.
The number is dialed and then the machine begins sending the fax
when the remote fax machine is ready.
NOTE
: When you want to cancel the fax job, press
Stop/Clear
at any time
while sending the fax.
Sending a Fax Manually
1
Load the document(s) face down into the ADF.
For details about loading a document, see page 2.2.
2
Adjust the document resolution to suit your fax needs. See page 2.3.
If you need to change the darkness, see page 1.20.
3
Press On Hook Dial or lift the handset. You hear a dial tone.
4
Enter the remote fax machine’s fax number using the number keypad.
You can use the one-touch keypad or speed or group dial numbers. For
details about storing a number, see page 2.16.
5
When you hear a high-pitched fax signal from the remote fax machine,
press Start Copy/Fax.
NOTE
: When you want to cancel the fax job, press
Stop/Clear
at any time
while sending the fax.