Filter
Top Products
B
ASIC
F
UNCTIONS
2.14
Changing the Default Settings
Copy options, including darkness, original type, copy size and number of
copies, can be set to the most frequently used modes. When you copy a
document, the default settings are used unless they are changed by using
the corresponding buttons on the control panel.
To create your own default settings:
1
Press Menu on the control panel until “Copy Setup” appears on the top
line of the display.
The first menu item, “Default-Change,” appears on the bottom line.
2
Press Enter to access the menu item. The first setup option,
“Darkness,” appears on the bottom line.
3
Press the scroll button (¥ or ) to scroll through the setup options.
4
When the option you want to set appears, press Enter to access the
option.
5
Change the setting using the scroll button (¥ or ) or enter the value
using the number keypad.
6
Press Enter to save the selection.
7
Repeat steps 3 through 6, as needed.
8
To return to Standby mode, press Stop/Clear.
NOTE
: While you set copy options, pressing
Stop/Clear
cancels the changed
settings and restores their default status.
Setting the Time Out Option
You can set the time the machine waits before it restores the default copy
settings, if you do not start copying after changing them on the control
panel.
1
Press Menu on the control panel until “Copy Setup” appears on the top
line of the display.
2
Press the scroll button (¥ or ) to display “Timeout” on the bottom
line.
3
Press Enter to access the menu item.
4
Press the scroll button (¥ or ) until the status you want appears on
the display.
You can select from 15, 30, 60 and 180 (seconds). Selecting “Off”
means that the machine does not restore the default settings until you
press Start Copy/Fax to start copying, or Stop/Clear to cancel.
5
Press Enter to save the selection.
6
To return to Standby mode, press Stop/Clear.