Filter
Top Products
T
ROUBLESHOOTING
6.4
In the Paper Exit Area
1
Open and close the front cover. The jammed paper automatically exits
the machine.
If the paper does not exit, continue to step 2.
2
Gently pull the paper out of the front output tray. Skip to step 6.
If there is any resistance and the paper does not move when you pull
or if you cannot see the paper in the front output tray, continue to step
3.
3
Open the rear cover.
4
Remove the jammed paper by gently pulling it straight out.
5
Close the rear cover.
6
Open and close the front cover to resume printing.
In the Fuser Area or Around the Toner Cartridge
NOTE
: The fuser area is hot. Take care when removing paper from the
machine.
1
Open the front cover and pull the toner cartridge out, lightly pushing it
down.
2
Remove the jammed paper by gently pulling it straight out.