Muratec F-112 All in One Printer User Manual


 
v
Important Precautions and Safety Information
When using this machine, these basic safety precautions should always be followed to reduce risk
of fire, electric shock, and injury to people:
1. Read and understand all instructions.
2. Use common sense whenever operating electrical appliances.
3. Follow all warnings and instructions marked on the machine and in the literature accompanying
the machine.
4. If an operating instruction appears to conflict with safety information, heed the safety
information. You may have misunderstood the operating instruction. If you cannot resolve the
conflict, contact your sales or service representative for assistance.
5. Unplug the machine from the AC wall socket and/or telephone jack before cleaning. Do not use
liquid or aerosol cleaners. Use only a damp cloth for cleaning.
6. Do not place the machine on an unstable cart, stand or table. It may fall, causing serious
damage.
7. Your machine should never be placed on, near or over a radiator, heater, air conditioner or
ventilation duct.
8. Do not allow anything to rest on the power cable. Do not locate your machine where the cords
will be abused by persons walking on them.
9. Do not overload wall outlets and extension cords. This can diminish performance, and may
result in the risk of fire or electric shock.
10. Do not allow pets to chew on the AC power, telephone or PC interface cords.
11. Never push objects of any kind into the machine through case or cabinet openings. They may
touch dangerous voltage points, creating a risk of fire or shock. Never spill liquid of any kind
onto or into the machine.
12. You machine may have a heavy cover for optimal pressure on the document for the best
scanning and/or faxing. In this case, replace the cover after placing document on the scan glass,
by holding and moving it down slowly until it seats on its location.
13. To reduce the risk of electric shock, do not disassemble the machine. Take it to a qualified
service technician when repair work is required. Opening or removing covers may expose you
to dangerous voltages or other risks. Incorrect reassembly could cause electric shock when the
unit is subsequently used.
14. Unplug the machine from the telephone jack, PC and AC wall outlet, and refer servicing to
qualified service personnel under the following conditions:
•When any part of the power cord, plug, or connecting cable is damaged or frayed.
•If liquid has been spilled into the machine.
•If the machine has been exposed to rain or water.
•If the machine does not operate properly after instructions have been followed.
•If the machine has been dropped, or the cabinet appears damaged.
•If the machine exhibits a sudden and distinct change in performance.
15. Adjust only those controls covered by the operating instructions. Improper adjustment of other
controls may result in damage, and may require extensive work by a qualified service technician
to restore the machine to normal operation.
16. Avoid using this machine during a lightning storm. There may be a remote risk of electric shock
from lightning. If possible, unplug the AC power and telephone cord for the duration of the
lightning storm.
17. SAVE THESE INSTRUCTIONS.
18. Use only No.26 AWG or larger telephone line cord.