NETGEAR 7000 Series Switch User Manual


 
NETGEAR 7000 Series Managed Switch Administration Guide Version 7.2
Access Control Lists (ACLs) 9-41
v1.0, May 2008
Example #4 permit
(Netgear Switch) (Config)#mac access-list extended b2
(Netgear Switch) (Config-mac-access-list)#permit 00:00:00:00:00:00 ?
<dstmac> Enter a MAC Address.
any Configure a a match condition for all the destination MAC
addresses in the Destination MAC Address field.
(Netgear Switch) (Config-mac-access-list)#permit 00:00:00:00:00:00 any
access-queue Configure the Queue Id assignment attribute.
cos Configure a match condition based on a CoS value.
<ethertypekey> Enter one of the following keywords to specify an Ethertype
(appletalk, arp, ibmsna, ipv4, ipv6, ipx, mplsmcast, mplsucast,
netbios, novell, pppo,rarp).
<0x0600-0xffff) Enter a four-digit hexadecimal number in the range of 0x0600 to
0xffff to specify a custom Ethertype value.
vlan Configure a match condition based on a VLAN ID.
<cr> Press Enter to execute the command.