Filter
Top Products
NETGEAR 7000 Series Managed Switch Administration Guide Version 7.2
IP Routing Services 7-13
v1.0, May 2008
• To prevent any RIP packets from being transmitted
CLI Examples
The configuration commands used in the following example enable RIP on ports 1/0/2 and 1/0/3 as
shown in the network illustrated in Figure 7-4
Example #1: Enable Routing for the Switch
The following sequence enables routing for the switch:
Figure 7-4
(Netgear Switch) #config
(Netgear Switch) (Config)#ip routing
(Netgear Switch) (Config)#exit