Filter
Top Products
NETGEAR 7000 Series Managed Switch Administration Guide Version 7.2
Protected Ports 25-7
v1.0, May 2008
b. Under IP Configuration, make the following selections:
• Next to Routing Mode, select the Enable radio button.
• Next to IP Forwarding Mode, select the Enable radio button.
c. Click Apply to enable IP Routing.
5. Configure default route for VLAN 202:
a. From the main menu, select Routing > Routing Table > Basic > Route Configuration. A
screen similar to the following displays.
b. Under Configure Routes, select DefaultRoute from the Route Type pulldown menu.
c. Under Configure Routes, in the Next Hop IP Address field, enter 10.100.5.252.
d. Click Add to add the route that is associated to VLAN 202 to the Learned Routes table.
Figure 0-1
Figure 25-5