NETGEAR 7000 Series Switch User Manual


 
NETGEAR 7000 Series Managed Switch Administration Guide Version 7.2
2-14 Getting Started
v1.0, May 2008
copy <tftp://
<ipaddress>/
<filepath>/<file-
name>> sys-
tem:image
Privileged
EXEC
Sets the destination (download) datatype to be an image.
The URL must be specified as:
tftp://<ipaddress>/<filepath>/<filename>
The system:image option downloads the code file.
clear config
Privileged
EXEC
Enter yes when the prompt asks if you want to clear all the con-
figurations made to the networking device.
copy system:run-
ning-config
nvram:startup-
config
Privileged
EXEC
Enter yes when the prompt asks if you want to save the configu-
rations made to the networking device.
reload (or cold boot
the networking device)
Privileged
EXEC
Enter yes when the prompt asks if you want to reset the system.
You can reset the networking device or cold boot the network-
ing device. Both work effectively.
Table 2-1. Quick Start Commands
Command Mode Description