Filter
Top Products
NETGEAR 7000 Series Managed Switch Administration Guide Version 7.2
Introduction 1-3
v1.0, May 2008
CLI Documentation
The Command Line Reference provides information about the CLI commands used to configure
the switch and the stack. The document provides CLI descriptions, syntax, and default values.
Refer to the Command Line Reference for information for the command structure
Related Documentation
Before proceeding, read the Release Notes for this switch product. The Release Notes detail the
platform specific functionality of the Switching, Routing, SNMP, Config, Management, and other
packages. In addition, see the following publications:
• Netgear Quick Installation Guide, 7000 Series Managed Switch
• Netgear CLI Reference for the Prosafe 7X00 Series Managed Switch. There are three
documents in this series; choose the appropriate one for your product.
• Netgear Hardware Installation Guide for your switch
These documents may be found at http://www.NETGEAR.com.