Filter
Top Products
NETGEAR 7000 Series Managed Switch Administration Guide Version 7.2
25-6 Protected Ports
v1.0, May 2008
The U specifies that the egress packet is untagged for the port.
d. Click Apply to save the VLAN that includes ports 23 and 24.
3. Configure a VLAN and include port 1/0/48 in the VLAN:
a. From the main menu, select Routing > VLAN > VLAN Routing Wizard. A screen similar
to the following displays.
b. Enter the following information in the VLAN Routing Wizard:
• In the Vlan ID field, enter 202.
• In the IP Address field, enter 10.100.5.34.
• In the Network Mask field, enter 255.255.255.0.
c. Click Unit 1. The ports display:
d. Click the gray box under port 48 twice until U displays. The U specifies that the egress
packet is untagged for the port.
e. Click Apply to save the VLAN that includes port 48.
4. Enable IP Routing:
a. From the main menu, select Routing > IP > Basic > IP Configuration. A screen similar to
the following displays.
Figure 25-4