NETGEAR 7000 Series Managed Switch Administration Guide Version 7.2
Access Control Lists (ACLs) 9-19
v1.0, May 2008
To use the Web interface to configure the GSM7352S, proceed as follows:
1. Create VLAN 40 with IP address 192.168.40.1/24:
a. From the main menu, select Routing > VLAN > VLAN Routing Wizard. A screen similar
to the following displays.
b. Enter the following information in the VLAN Routing Wizard:
• In the Vlan ID field, enter 40.
• In the IP Address field, enter 192.168.40.1.
• In the Network Mask field, enter 255.255.255.0.
c. Click Unit 1. The ports display.
d. Click the gray box under port 24 twice until U displays. The U specifies that the egress
packet is untagged for the port.
e. Click Apply to save VLAN 40.
Figure 9-17