Filter
Top Products
Switching Commands
137
ProSafe M4100 and M7100 Managed Switches
0/1 Yes No
0/2 No Yes
0/3 No Yes
0/4 No No
0/6 No No
show ip dhcp snooping binding
Use this command to display the DHCP Snooping binding entries. To restrict the output, use
the following options:
• Dynamic: Restrict the output based on DCHP snooping.
• Interface: Restrict the output based on a specific interface.
• Static: Restrict the output based on static entries.
• VLAN: Restrict the output based on VLAN.
Format show ip dhcp snooping binding [{static/dynamic}] [interface
slot/port] [vlan id]
Mode
• Privileged EXEC
• User EXEC
Example: The following shows example CLI display output for the command.
(switch) #show ip dhcp snooping binding
Total number of bindings: 2
MAC Address IP Address VLAN Interface Type Lease (Secs)
------------------ ------------ ---- --------- ---- -------------
00:02:B3:06:60:80 210.1.1.3 10 0/1 86400
00:0F:FE:00:13:04 210.1.1.4 10 0/1 86400
Term Definition
MAC Address
Displays the MAC address for the binding that was added. The MAC address is the key
to the binding database.
IP Address
Displays the valid IP address for the binding rule.
VLAN
The VLAN for the binding rule.
Interface
The interface to add a binding into the DHCP snooping interface.
Type
Binding type; statically configured from the CLI or dynamically learned.
Lease (sec)
The remaining lease time for the entry.