Filter
Top Products
Log Messages
720
ProSafe M4100 and M7100 Managed Switches
IGMP Snooping
Failed to set igmp mrouter mode %d for
interface xxx on VLAN yyy
Failed to set VLAN multicast router mode
due to IGMP Snooping message queue
being full
IGMP Snooping
snoopCnfgrInitPhase1Process: Error
allocating small buffers
Could not allocate buffers for small IGMP
packets
IGMP Snooping
snoopCnfgrInitPhase1Process: Error
allocating large buffers
Could not allocate buffers for large IGMP
packets
Table 26. GARP/GVRP/GMRP Log Messages
Component Message Cause
GARP/GVRP/
GMRP
garpSpanState, garpIfStateChange,
GarpIssueCmd,
garpDot1sChangeCallBack,
garpApiCnfgrCommand,
garpLeaveAllTimerCallback,
garpTimerCallback: QUEUE SEND
FAILURE:
The garpQueue is full, logs specifics of the
message content like internal interface
number, type of message, and so on.
GARP/GVRP/
GMRP
GarpSendPDU: QUEUE SEND FAILURE The garpPduQueue is full, logs specific of
the GPDU, internal interface number, VLAN
id, buffer handle, and so on.
GARP/GVRP/
GMRP
garpMapIntfIsConfigurable,
gmrpMapIntfIsConfigurable: Error
accessing GARP/GMRP config data for
interface %d in garpMapIntfIsConfigurable.
A default configuration does not exist for
this interface. Typically a case when a new
interface is created and has no
pre-configuration.
GARP/GVRP/
GMRP
garpTraceMsgQueueUsage: garpQueue
usage has exceeded fifty/eighty/ninety
percent
Traces the buildup of message queue.
Helpful in determining the load on GARP.
GARP/GVRP/
GMRP
gid_destroy_port: Error Removing port %d
registration for vlan-mac %d -
%02X:%02X:%02X:%02X:%02X:%02X
Mismatch between the gmd (gmrp
database) and MFDB.
GARP/GVRP/
GMRP
gmd_create_entry: GMRP failure adding
MFDB entry: vlan %d and address %s
MFDB table is full.
Table 25. IGMP Snooping Log Messages
Component Message Cause