Filter
Top Products
Switching Commands
192
ProSafe M4100 and M7100 Managed Switches
Example: The following shows example CLI display output for the command.
(Switch) #show lldp med remote-device detail 0/8
Device Class
Shows the device class as advertized by the device remotely connected to the port.
Network Policy
Information
Shows if network policy TLV is received in the LLDP frames on this port.
Media
Application
Type
Shows the application type. Types of applications are unknown, voice, voicesignaling,
guestvoice, guestvoicesignaling, sfotphonevoice, videoconferencing, streamingvideo,
videosignaling.
VLAN Id
Shows the VLAN id associated with a particular policy type.
Priority
Shows the priority associated with a particular policy type.
DSCP
Shows the DSCP associated with a particular policy type.
Unknown
Indicates if the policy type is unknown. In this case, the VLAN id, Priority and DSCP are
ignored.
Tagged
Indicates if the policy type is using tagged or untagged VLAN.
Hardware
Revision
Shows the hardware version of the remote device.
Firmware
Revision
Shows the firmware version of the remote device.
Software
Revision
Shows the software version of the remote device.
Serial Number
Shows the serial number of the remote device.
Manufacturer
Name
Shows the manufacture name of the remote device.
Model Name
Shows the model name of the remote device.
Asset ID
Shows the asset id of the remote device.
Sub Type
Shows the type of location information.
Location
Information
Shows the location information as a string for a given type of location id
Device Type
Shows the remote device’s PoE device type connected to this port.
Available
Shows the remote port’s PSE power value in tenths of a watt.
Source
Shows the remote port’s PSE power source.
Priority
Shows the remote port’s PSE priority.
Required
Shows the remote port’s PD power requirement.
Source
Shows the remote port’s PD power source.
Priority
Shows the remote port’s PD power priority.
Term Definition