Filter
Top Products
Utility Commands
573
ProSafe M4100 and M7100 Managed Switches
show ip dhcp binding
This command displays address bindings for the specific IP address on the DHCP server. If
no IP address is specified, the bindings corresponding to all the addresses are displayed.
Format show ip dhcp binding [<address>]
Modes
• Privileged EXEC
• User EXEC
IP address
Hardware
Address
Lease
expiration
Type
show ip dhcp global configuration
This command displays address bindings for the specific IP address on the DHCP server. If
no IP address is specified, the bindings corresponding to all the addresses are displayed.
Format show ip dhcp global configuration
Modes
• Privileged EXEC
• User EXEC
Service DHCP
Number of Ping
Packets
Conflict
Logging
BootP
Automatic
show ip dhcp pool configuration
This command displays pool configuration. If all is specified, configuration for all the pools
is displayed.
Format show ip dhcp pool configuration {<name> | all}
Modes
• Privileged EXEC
• User EXEC
Term Definition
The IP address of the client.
The MAC Address or the client identifier.
The lease expiration time of the IP address assigned to the client.
The manner in which IP address was assigned to the client.
Term Definition
The field to display the status of dhcp protocol.
The maximum number of Ping Packets that will be sent to verify that an ip address id not
already assigned.
Shows whether conflict logging is enabled or disabled.
Shows whether BootP for dynamic pools is enabled or disabled.