NETGEAR M7100-24X Switch User Manual


 
Utility Commands
533
ProSafe M4100 and M7100 Managed Switches
length
Use this command to set the pagination length to value number of lines for the sessions
specified by configuring on different Line Config modes (telnet, ssh, and console) and is
persistent.
Default
Format
length <0|5-48>
Mode
no length value
Use this command to set the pagination length to the default value number of lines.
Format
no length
Mode
terminal length
Use this command to set the number of lines of output to be displayed on the screen, i.e.
pagination, for the show running-config and show running-config all commands.
The terminal length size is either zero or a number in the range of 5–48. After the
user-configured number of lines is displayed in one page, the system prompts the user
--More-- or (q)uit.” Press q or Q to quit, or press any key to display the next set
of <5-48> lines. The command terminal length 0 disables pagination and, as a result,
the output of the show running-config command is displayed immediately.
Default
Format terminal length <0|5-48>
Mode
no terminal length
Use this command to set the terminal length to the default value.
Format no terminal length
Mode
show terminal length
Use this command to display the value of the user-configured terminal length size.
Format show terminal length
Mode
24
Line Config
Line Config
24 lines per page
Privileged EXEC
Privileged EXEC
Privileged EXEC