Filter
Top Products
IP Multicast Commands
351
ProSafe M4100 and M7100 Managed Switches
Example: The following example shows CLI display output for the command.
(Switch) #show ip igmp-proxy
Interface Index............................................. 0/1
Admin Mode................................................ Enable
Operational Mode......................................... Enable
Version......................................................... 3
Num of Multicast Groups............................. 0
Unsolicited Report Interval.......................... 1
Querier IP Address on Proxy Interface........ 5.5.5.50
Older Version 1 Querier Timeout................ 0
Older Version 2 Querier Timeout................ 00::00:00
Proxy Start Frequency................................. 1
show ip igmp-proxy interface
This command displays a detailed list of the host interface status parameters. It displays the
following parameters only when you enable IGMP Proxy.
Format show ip igmp-proxy interface
Modes
• Privileged EXEC
• User EXEC
Interface Index
The column headings of the table associated with the interface are as follows:
Number of
Multicast
Groups
The number of multicast groups that are associated with the IGMP Proxy interface.
Unsolicited
Report Interval
The time interval at which the IGMP Proxy interface sends unsolicited group membership
report.
Querier IP
Address on
Proxy Interface
The IP address of the Querier, if any, in the network attached to the upstream interface
(IGMP-Proxy interface).
Older Version 1
Querier Timeout
The interval used to timeout the older version 1 queriers.
Older Version 2
Querier Timeout
The interval used to timeout the older version 2 queriers.
Proxy Start
Frequency
The number of times the IGMP Proxy has been stopped and started.
Term Definition
The slot/port of the IGMP proxy.
Term Definition