Filter
Top Products
IPv6 Commands
363
ProSafe M4100 and M7100 Managed Switches
ipv6 nd managed-config-flag
This command sets the “managed address configuration” flag in router advertisements.
When the value is true, end nodes use DHCPv6. When the value is false, end nodes
automatically configure addresses.
Default
Format ipv6 nd managed-config-flag
Mode
no ipv6 nd managed-config-flag
This command resets the “managed address configuration” flag in router advertisements to
the default value.
Format no ipv6 nd managed-config-flag
Mode
ipv6 nd ns-interval
This command sets the interval between router advertisements for advertised neighbor
solicitations, in milliseconds. An advertised value of 0 means the interval is unspecified.
Default
Format ipv6 nd ns-interval {<1000-4294967295> | 0}
Mode
no ipv6 nd ns-interval
This command resets the neighbor solicit retransmission interval of the specified interface to
the default value.
Format no ipv6 nd ns-interval
Mode
ipv6 nd other-config-flag
This command sets the “other stateful configuration” flag in router advertisements sent from
the interface.
Default
Format ipv6 nd other-config-flag
Mode
false
Interface Config
Interface Config
0
Interface Config
Interface Config
false
Interface Config