Filter
Top Products
IPv6 Commands
386
ProSafe M4100 and M7100 Managed Switches
area nssa no-summary (OSPFv3)
This command configures the NSSA so that summary LSAs are not advertised into the
NSSA.
Format area <areaid> nssa no-summary
Mode
no area nssa no-summary (OSPFv3)
This command disables nssa from the summary LSAs.
Format no area <areaid> nssa no-summary
Mode
area nssa translator-role (OSPFv3)
This command configures the translator role of the NSSA. A value of always causes the
router to assume the role of the translator the instant it becomes a border router and a value
of candidate causes the router to participate in the translator election process when it
attains border router status.
Format area <areaid> nssa translator-role {always | candidate}
Mode
no area nssa translator-role (OSPFv3)
This command disables the nssa translator role from the specified area id.
Format no area <areaid> nssa translator-role {always | candidate}
Mode
area nssa translator-stab-intv (OSPFv3)
This command configures the translator <stabilityinterval> of the NSSA. The
<stabilityinterval> is the period of time that an elected translator continues to perform
its duties after it determines that its translator status has been deposed by another router.
Format area <areaid> nssa translator-stab-intv <stabilityinterval>
Mode
Router OSPFv3 Config
Router OSPF Config
Router OSPFv3 Config
Router OSPF Config
Router OSPFv3 Config