Log Messages
719
ProSafe M4100 and M7100 Managed Switches
Mac based
VLANS
vlanMacVlanChangeCallback: Failed to
add an entry
Appears when a dtl fails to add an entry for
a VLAN add notify event.
Mac based
VLANS
vlanMacVlanChangeCallback: Failed to
delete an entry
Appears when a dtl fails to delete an entry
for an VLAN delete notify event.
Table 24. 802.1x Log Messages
Component Message Cause
802.1X
function: Failed calling dot1xIssueCmd 802.1X message queue is full
802.1X
function: EAP message not received from
server
RADIUS server did not send required EAP
message
802.1X
function: Out of System buffers 802.1X cannot process/transmit message
due to lack of internal buffers
802.1X
function: could not set state to
<authorized/unauthorized>, intf xxx
DTL call failed setting authorization state of
the port
802.1X
dot1xApplyConfigData: Unable to
<enable/disable> dot1x in driver
DTL call failed enabling/disabling 802.1X
802.1X
dot1xSendRespToServer:
dot1xRadiusAccessRequestSend failed
Failed sending message to RADIUS server
802.1X
dot1xRadiusAcceptProcess: error calling
radiusAccountingStart, ifIndex=xxx
Failed sending accounting start to RADIUS
server
802.1X
function: failed sending terminate cause,
intf xxx
Failed sending accounting stop to RADIUS
server
Table 25. IGMP Snooping Log Messages
Component Message Cause
IGMP Snooping
function: osapiMessageSend failed IGMP Snooping message queue is full
IGMP Snooping
Failed to set global igmp snooping mode to
xxx
Failed to set global IGMP Snooping mode
due to message queue being full
IGMP Snooping
Failed to set igmp snooping mode xxx for
interface yyy
Failed to set interface IGMP Snooping
mode due to message queue being full
IGMP Snooping
Failed to set igmp mrouter mode xxx for
interface yyy
Failed to set interface multicast router
mode due to IGMP Snooping message
queue being full
IGMP Snooping
Failed to set igmp snooping mode xxx for
VLAN yyy
Failed to set VLAN IGM Snooping mode
due to message queue being full
Table 23. Mac-based VLANs Log Messages
Component Message Cause