NETGEAR M7100-24X Switch User Manual


 
Log Messages
732
ProSafe M4100 and M7100 Managed Switches
O/S Support
OS
USL: failed to sync L3 Route table on unit=
x
Could not synchronize unit x due to a
transport failure or API issue on remote
unit. A synchronization retry will be issued
OS
USL: failed to sync initiator table on unit=x Could not synchronize unit x due to a
transport failure or API issue on remote
unit. A synchronization retry will be issued
OS
USL: failed to sync terminator table on
unit=x
Could not synchronize unit x due to a
transport failure or API issue on remote
unit. A synchronization retry will be issued
OS
USL: failed to sync ip-multicast table on
unit=x
Could not synchronize unit x due to a
transport failure or API issue on remote
unit. A synchronization retry will be issued
Table 55. OSAPI Log Messages
Component Message Cause
OSAPI
ftruncate failed – File resides on a
read-only file system.
ftruncate is called to correctly set the file’s
size in the file system after a write. The file
system is R/W so this msg indicates that
the file system may be corrupted.
OSAPI
ftruncate failed – File is open for reading
only.
ftruncate is called to correctly set the file’s
size in the file system after a write. The file
is opened for R/W so this msg indicates
that the file system may be corrupted.
OSAPI
ftruncate failed – File descriptor refers to a
file on which this operation is impossible.
ftruncate is called to correctly set the file’s
size in the file system after a write. This
msg indicates that the file system may be
corrupted.
OSAPI
ftruncate failed – Returned an unknown
code in errno.
ftruncate is called to correctly set the file’s
size in the file system after a write. This
msg indicates that the file system may be
corrupted.
OSAPI
ping: bad host! The address requested to ping cannot be
converted to an Internet address.
OSAPI
osapiTaskDelete: Failed for (XX) error YYY The requested task cannot be deleted
because: the requested deletion is called
from an ISR, the task is already deleted, or
the task ID is invalid.
Table 54. System General Error Messages
Component Message Cause