Filter
Top Products
IPv6 Commands
383
ProSafe M4100 and M7100 Managed Switches
no ipv6 ospf network
This command sets the interface type to the default value.
Format no ipv6 ospf network {broadcast | point-to-point}
Mode
ipv6 ospf priority
This command sets the OSPF priority for the specified router interface. The priority of the
interface is a priority integer from 0 to 255. A value of 0 indicates that the router is not eligible
to become the designated router on this network.
Default
Format ipv6 ospf priority <0-255>
Mode
no ipv6 ospf priority
This command sets the default OSPF priority for the specified router interface.
Format no ipv6 ospf priority
Mode
ipv6 ospf retransmit-interval
This command sets the OSPF retransmit Interval for the specified interface. The retransmit
interval is specified in seconds. The value for <seconds> is the number of seconds between
link-state advertisement retransmissions for adjacencies belonging to this router interface.
This value is also used when retransmitting database description and link-state request
packets. Valid values range from 0 to 3600 (1 hour).
Default
Format ipv6 ospf retransmit-interval
<seconds>
Mode
no ipv6 ospf retransmit-interval
This command sets the default OSPF retransmit Interval for the specified interface.
Format no ipv6 ospf retransmit-interval
Mode
Interface Config
1, which is the highest router priority
Interface Config
Interface Config
5
Interface Config
Interface Config