Filter
Top Products
Switching Commands
38
ProSafe M4100 and M7100 Managed Switches
are masked according to the 802.1s specification. This causes the priority to be rounded
down to the next lower valid priority.
Default
Format spanning-tree mst priority
<mstid> <0-61440>
Mode
no spanning-tree mst priority
This command sets the bridge priority for a specific multiple spanning tree instance to the
default value.
The parameter <mstid> is a number that corresponds to the desired existing
multiple spanning tree instance.
If 0 (defined as the default CIST ID) is passed as the <mstid>, this command sets the
Bridge Priority parameter for the Common and Internal Spanning
Tree to the default value.
Format no spanning-tree mst priority <mstid>
Mode
spanning-tree mst vlan
This command adds an association between a multiple spanning tree instance and one or
more VLANs so that the VLAN(s) are no longer associated with the Common and Internal
Spanning Tree. The parameter <mstid> is a number that corresponds to the desired
existing multiple spanning tree instance. The vlan range can be specified as a list or as a
range of values. To specify a list of VLANs, enter a list of VLAN IDs, each separated by a
comma with no spaces in between. To specify a range of VLANs, separate the beginning and
ending VLAN ID with a dash ("-").
Format spanning-tree mst vlan <mstid> <vlanid>
Mode
no spanning-tree mst vlan
This command removes an association between a multiple spanning tree instance and one
or more VLANs so that the VLAN(s) are again associated with the Common and Internal
Spanning T
ree.
Format no spanning-tree mst vlan <mstid> <vlanid>
Mode
32768
Global Config
Global Config
Global Config
Global Config