Filter
Top Products
Telephone user interface 143
Nortel Integrated Conference Bridge Service Implementation Guide
While the system is announcing the list of conference participants after
the chairperson enters *69, the chairperson can execute the
commands in Table 35.
Features available to all participants
Self mute/unmute toggle
All conference participants, including the chairperson, can put
themselves on mute by dialing *19. While on mute, the participant can
listen to the conference. To unmute, the participant dials *19 again.
Because there is one command for mute and unmute, the system
announces to the participant one of two possible voice messages:
“Muted” or “Unmuted.” Only the participant that activates the command
hears the mute/unmute announcement. The mute/unmute command is
available to those participants who dial into the conference and who the
chairperson brings into the conference using the dial-out command.
Stop or start music
This feature stops or starts the initial conference music, which is
possible only when the conferee is the first person joining the
conference. Dial *99. The first entry stops it, the second entry starts it.
Table 35
Chairperson commands during count command
Chairperson dials ... In order to ...
# Stop and start the playlist.
0 Consult privately with the conferee.
1 Mute/unmute the conferee.
2 Play the current conferee name greeting.
*3 Return to the conference.
4 Select the previous conferee and play name.
6 Select the next conferee and play name.
9 Disconnect the current conferee.
** Start and stop the help menu.