Upgrades 215
Nortel Integrated Conference Bridge Service Implementation Guide
Upgrade procedures
MICB Release 2 or MICB Release 3 card upgrade
Use Procedure 43 to upgrade your ICB card from Release 2 or Release 3.
Procedure 43
MICB Release 2 or MICB Release 3 card upgrade
1 Disable the operational MICB Release 2 or MICB Release 3 card using LD
32.
Note: CS 2100/Meridian SL-100 customers must Bsy the ICB card at the PM level,
before starting the procedure and RTS the card once the upgrade is complete.
2 Pull the MICB Release 2 or MICB Release 3 card out from the slot.
3 Remove the MICB Release 2 or MICB Release 3 PCMCIA from the lower
socket.
4 Insert a new ICB Release 4 PCMCIA in the lower socket of the new ICB
Release 4 card (vintage BC). This PCMCIA should be as shipped from the
factory, with no customer data on it.
5 Remove the security device from the old card and move it to the new ICB
Release 4 card.
6 Insert the new ICB Release 4 (vintage BC) into the slot.
7 Enter the new keycode.
User training Provide users with the ICB Release 4 User Guide and information about
the following:
• Custom greeting.
• How to access and use chairperson control.
• How to delegate chairperson control (that is, acquire and release
chairperson control).
• Volume control. How to use the feature from the TUI or the BUI
control screen.
• If single DN access is to be implemented, the changes to existing
conferences (that is, already booked) and future meetings need to be
communicated to the users.
• Microsoft Outlook
E-Mail format Changes to the E-Mail format should be reviewed and made visible to
people who will be creating meetings.
Table 57
User community upgrade considerations (Continued)
Item Description