Filter
Top Products
Reports 207
Nortel Integrated Conference Bridge Service Implementation Guide
CS 1000 Call Detail Recording
The Call Detail Recording (CDR) feature enables the ICB to charge
users for out-going calls based on CDR reports the CS 1000 system
generates. The reports are generated even if the call is unanswered.
The CS 1000 must have the following software packages: Call Detail
Recording (CDR) package 4; and CDR with Charge Account (CHG)
package 23.
Note: CDR is not available on the CS 2100/Meridian SL-100.
To enable the CDR feature, select “Billing and CDR Reports” from the
Billing options pull-down menu in the ICB Dashboard – General
Settings window (see
Figure 53 on page 108).
Meeting Ended – In these examples, the time stamp, card ID, meeting ID, billing account information,
and user ID was available. Examples report this event for three different cases:
The meeting was cancelled before it began.
10,05,00,05,1234,7,999,Barry,06,00
This record indicates that a user (Barry) cancelled
the meeting reservation at 10:05 am from the BUI,
before the scheduled start time. There were 6
ports booked for this meeting. The number of
used ports is 0, because none of participants
entered the meeting.
The active meeting was cancelled after it began.
12,48,00,06,1234,7,999,Barry,06,05
This record indicates that the meeting ended at
12:48 pm from the BUI, before the scheduled
meeting time elapsed. There were 6 ports booked
for this meeting. The next number (5) shows how
many participants entered the conference. This
number can be greater than the number of ports
booked for the meeting, because the meeting
person booking the meeting enabled the option
for expansion.
The meeting’s scheduled time elapsed.
13,28,00,07,1234,7,999,Barry,10,12
This record indicates that the meeting ended at
01:28 pm, because the scheduled time elapsed.
There were 10 ports booked for this meeting. The
next number (12) shows how many participants
entered the conference. This number is greater
than the number of ports booked for the meeting,
because of expansion during the meeting.
Card Restarted – In this example, the time stamp, and card ID information was available.
16,08,30,08,1234, This record indicates that there was a card restart
at 16:08:30. The event ID appears in bold letters.
1234 is the card’s ID, 7 is the meeting’s ID, and
999 is the customer’s billing ID.
Table 54
Event examples (Continued)
Example Description