Filter
Top Products
Page 22 of 544 Memory, Storage and CPU capacity
553-3011-100 Standard 14.00 January 2002
Software Installation program and pre-programmed data
The Software Installation program is automatically invoked when the new
Option 11C or Option 11C Mini is started up (SYSLOAD). After successfully
responding to various prompts in the program, you are given the option of
selecting a database to be loaded.
Detailed information about the Software Installation program can be found in
the Option 11C Planning and Installation (553-3021-210) or the Option 11C
Mini Planning and Installation (553-3021-209) used for first-time
installations; or the Option 11C and 11C Mini Upgrade Procedures (553-
3021-250) used for upgrades from an Option 11 or 11E to an Option 11C
system.
Table 5
Benefits of pre-programmed data
Task
Task performed using pre-
programmed data
Task performed without using
pre-programmed data
Activating
telephones
Plug telephone into socket, lift
handset, choose model,
choose extension
Enter LD 10 or 11, enter telephone type,
specify TN, assign class of service, assign
a feature to each key on telephone
LD 10 has approximately 120 prompts
LD 11 has approximately 160 prompts
Activating
trunks
Use the administration menu
to add a trunk:
• enter a route access code
• enter a TN
• enter a trunk model
Enter LD 16, enter trunk type, access code,
signalling arrangements
Enter LD 14, enter TN, route member
number, signalling arrangements, class of
service, and so on
LD 16 has approximately 200 prompts
LD 14 has approximately 50 prompts
Establishing a
numbering
plan
No effort required. Default
extension numbers become
active when telephones are
activated. Default plan is
sequential.
A numbering plan must be developed to
map TNs to DNs.