![](http://pdfasset.owneriq.net/a/99/a9933c8c-a6bf-409f-96ad-2a6a14b125dd/a9933c8c-a6bf-409f-96ad-2a6a14b125dd-bg15c.png)
Page 348 of 544 M5317 BRI Terminal
553-3011-100 Standard 14.00 January 2002
Configuration mode
This feature is intended for installers and sophisticated users and is
interlocked with power-on and a special key sequence. Some menus are:
• TEI assignment voice, circuit-switched data, and packet-switched X.25
data (no default, but retained if power lost). X.25 TEI can only be static;
the others must be dynamic.
• Service Identifier Profile (SPID) assignment for voice and circuit-
switched data, not required for packet-switching. (no default, but
retained if power is lost.)
• DN assignment for circuit-switched and packet-switched data
• Test: analog and digital
• Selection of Codec coding law
• Selection of voice and circuit-switched data signaling protocol
Setup mode
Setup mode is intended for use by all M5317T digital telephone users. In NI-
1 and Meridian 1 mode, press Setup to display the Setup menu. In MFT mode,
press the center of the volume key to access Setup. The Setup menu includes:
• alerting tone style and cadence (NI-1 and Meridian 1 mode only)
• default volume for handset/headset, alerting tones, and speakerphone
(NI-1 and Meridian 1 mode only)
• query features enabled and DNs (NI-1 and Meridian 1 mode only)
• Service Profile Management (SPM). Enter the four-digit password
“5317” to display an SPM softkey.
• various data options (baud rate, parity, etc.)
• protocol version
• contrast adjustment
• language