Filter
Top Products
NTAK09 1.5 Mb DTI/PRI card Page 453 of 544
Option 11C and 11C Mini Technical Reference Guide
DS-1 Carrier interface
Transmitter
The transmitter takes the binary data (dual unipolar) from the PCM
transceiver and produces bipolar pulses for transmission to the external
digital facility. The DS1 transmit equalizer allows the cabling distance to be
extended from the card to the DSX-1 or LD-1. Equalizers are switch
selectable through dip-switches and the settings are as shown below.
Receiver
The receiver extracts data and clock from an incoming data stream and
outputs clock and synchronized data. At worst case DSX-1 signal levels, the
line receiver will operate correctly with up to 655 feet of ABAM cable
between the card and the external DS1 signal source.
Table 141
NTAK09 switch settings
Distance to Digital Cross-Connect
Switch Setting
1
DCH F/W
2
(LEN 0)
3
(LEN 1)
4
(LEN 2)
0 - 133 feet Off Off Off On
133 - 266 feet Off On On Off
266 - 399 feet Off Off On Off
399 - 533 feet Off On Off Off
533 - 655 feet Off Off Off Off