Packard Bell NS1 1HR Laptop User Manual


 
CHAPTER 4: Troubleshooting
104
System timer error
Test or replace the CMOS battery, run the BIOS Setup Utility to
reconfigure system time, then reboot the system.
Test or replace the system board.
Real time clock error
Test or replace the CMOS battery, run the BIOS Setup Utility to
reconfigure system time, then reboot the system.
Test or replace the system board.
Previous boot incomplete - Default configuration
used
Run “Load Setup Defaults” using the BIOS Setup Utility, then reboot
the notebook.
Test or replace the CMOS battery, run the BIOS Setup Utility to
reconfigure system time, then reboot the system.
Test or replace the system board.
Memory size found by POST differed from
CMOS
Run “Load Setup Defaults” using the BIOS Setup Utility, then reboot
the notebook.
Test or replace the SO-DIMM.
Test or replace the system board.
Diskette drive A error
Make sure that the drive is defined with the proper diskette type in the
BIOS Setup Utility.
Incorrect Drive A type - run SETUP Make sure that the drive is defined with the proper diskette type in the
BIOS Setup Utility
System cache error - Cache disabled Test or replace the system board.
CPU ID: Test or replace the system board.
DMA Test Failed
Test or replace the SO-DIMM.
Test or replace the system board.
Software NMI Failed
Test or replace the SO-DIMM.
Test or replace the system board.
Fail-Safe Timer NMI Failed
Test or replace the SO-DIMM.
Test or replace the system board.
Device Address Conflict
Run “Load Setup Defaults” using the BIOS Setup Utility, then reboot
the notebook.
Test or replace the CMOS battery, run the BIOS Setup Utility to
reconfigure system time, then reboot the system.
Test or replace the system board.
Allocation Error for device
Run “Load Setup Defaults” using the BIOS Setup Utility, then reboot
the notebook.
Test or replace the CMOS battery, run the BIOS Setup Utility to
reconfigure system time, then reboot the system.
Test or replace the system board.
Failing Bits: nnnn
Test or replace the SO-DIMM.
Test or replace the BIOS ROM.
Test or replace the system board.
Fixed Disk n None
Invalid System Configuration Data
Test or replace the BIOS ROM.
Test or replace the system board.
Error Messages FRU/Action Sequence