Filter
Top Products
CHAPTER 3: Replacing notebook components
80
4 Remove the LCD front panel screws.
5 Carefully pry loose the front panel from the LCD assembly lid. Start on the
bottom side, continue to the left and right sides, and finally the top side.
Remove the front panel.
6 Place the new front panel on top of the LCD assembly lid.
Make sure that the LCD, webcam, microphone, and antenna cables are
properly routed on the hinge sides.
7 Press the front panel on all sides until it snaps into place.
Make sure that there is no gap between the front panel and the LCD
assembly lid.
8 Secure the front panel with screws removed in step 4.
9 Return the LCD front panel screw covers to their places.
10 Reinstall the LCD panel assembly by following the steps 13 – 15 of the
“Replacing the LCD panel assembly” procedure on page 76.
11 Reinstall the system board by performing steps 19 and 20 of the “Replacing
the system board” procedure on page 67.
12 Reinstall the keyboard by performing steps 21 – 24 of the “Replacing the
keyboard” procedure on page 53.
13 Reinstall the palm rest module by performing steps 14 – 17 of the “Replacing
the palm rest module” procedure on page 48.
14 Reinstall the optical drive by performing steps 10 and 11 of the “Replacing
the optical drive” procedure on page 46.
15 Reinstall the hard drive by performing steps 8 and 9 of the “Replacing the
hard drive” procedure on page 41.