Filter
Top Products
www.packardbell.com
53
Replacing the keyboard
Tools you need to complete this task:
Screws removed during this task:
• 3 black M2.5×6 (bay cover)
• 1 black M2×3 (hard drive)
• 1 black M2.5×6 (optical drive)
• 5 black M2×3 (keyboard frame - top base side) - Indicated
by A in step 8)
• 13 black M2.5×6 (keyboard
frame/palm rest module - base side) - indicated by B in step 8)
• 12 black M2×2 (keyboard
frame) - indicated by A in step 16)
• 10 black M1.4×3 (keyboard frame) -
indicated by B in step 16)
To replace the keyboard:
1 Complete the steps in “Preparing the notebook” on page 37.
2 Complete the steps in “Removing the battery” on page 38.
3 Complete the steps in “Removing the bay cover” on page 39.
Caution
The keyboard is connected to the notebook through the keyboard
cable. Disconnect this cable first before pulling the keyboard away
from the palm rest.
Phillips #0 screwdriver
Flat screwdriver or Non-marring plastic scribe