Packard Bell NS1 1HR Laptop User Manual


 
www.packardbell.com
79
Replacing the LCD front panel
Tools you need to complete this task:
Screws removed during this task:
3 black M2.5×6 (bay cover)
1 black M2×3 (hard drive)
1 black M2.5×6 (optical drive)
5 black M2×3 (keyboard frame - top base side) - Indicated
by A in step 8 of the “Replacing the keyboard” procedure on page 53
13 black M2.5×6 (keyboard
frame/palm rest module - base side) - indicated by B in step 8 of the
“Replacing the keyboard” procedure on page 53
1 black M2×3 (system board)
4 black M2.5×6 (LCD panel hinges)
2 black M2.5×5 (LCD front panel)
To replace the LCD front panel:
1 Complete the steps in “Preparing the notebook” on page 37.
2 Remove the LCD panel assembly by performing steps 2 12 of the
“Replacing the LCD panel assembly” procedure on page 76.
3 Remove the screw covers from the corner of the LCD front panel.
Phillips #0 screwdriver
Flat screwdriver or Non-marring plastic scribe