Filter
Top Products
CHAPTER 3: Replacing notebook components
62
8 Disconnect the speaker cable from the power board.
9 Unlock the power button board cable connector (1), and then remove the
cable (2).
10 Remove the power button board screw, and then remove the old power
button board from the keyboard frame.
11 Position the new power button board on the keyboard frame.
12 Secure the power button board with the screw removed in step 10.
13 Insert the power button cable to the power button board cable connector,
and then close the clip to lock the cable in place.
14 Reinstall the keyboard by performing steps 21 – 24 of the “Replacing the
keyboard” procedure on page 53.
15 Reinstall the palm rest module by performing steps 14 – 17 of the “Replacing
the palm rest module” procedure on page 48.
16 Reinstall the optical drive by performing steps 10 and 11 of the “Replacing
the optical drive” procedure on page 46.
17 Reinstall the hard drive by performing steps 8 and 9 of the “Replacing the
hard drive” procedure on page 41.
18 If you have disconnected any wireless antennas, reconnect them now.
19 Reinstall the bay cover.
20 Reinstall the battery.