Packard Bell NS1 1HR Laptop User Manual


 
CHAPTER 3: Replacing notebook components
78
13 Position the new LCD panel assembly on the notebook, and then secure it
with the hinge screws removed in step 11.
14 If the notebook has a wireless card installed, proceed to step 15 to arrange
the antenna cables.
15 Refer to the antenna cable routing note made on step 9 and secure the
antenna cables to the base enclosure before pulling the ends downward to
the wireless card compartment.
16 Reinstall the system board by performing steps 19 and 20 of the “Replacing
the system board” procedure on page 67.
17 Reinstall the keyboard by performing steps 21 24 of the “Replacing the
keyboard” procedure on page 53.
18 Reinstall the palm rest module by performing steps 14 17 of the “Replacing
the palm rest module” procedure on page 48.
19 Reinstall the optical drive by performing steps 10 and 11 of the “Replacing
the optical drive” procedure on page 46.
20 Reinstall the hard drive by performing steps 8 and 9 of the “Replacing the
hard drive” procedure on page 41.
21 If you have disconnected any wireless antennas, reconnect them now.
22 Reinstall the bay cover.
23 Reinstall the battery.