Packard Bell NS1 1HR Laptop User Manual


 
CHAPTER 1: System specifications
8
Memory
Supported protocols
Legacy BIOS and EFI architecture support
ACPI 3.0b compliance
PXE specification version 2.1
SMBIO Reference specification version 2.5 or later
USB specification revision 1.1/2.0/3.0
ASF specification version 2.0 or later
PCI Express base specification revision 2.1
PCI BIOS specification revision 2.1
BIOS Boot specification version 1.01
Simple boot flag specification version 2.1
System management bus specification version 2.0
AHCI support
Microsoft XP/Vista/Windows 7 logo program
Microsoft SLP 1.0 support
Microsoft OA 2.0/2.1 support
BIOS password control Manually set
Item Specification
Memory controller Built-in
Memory size 0 MB (no on-board memory)
SO-DIMM socket
number
2 sockets
Supports maximum
memory size
8GB
Supports SO-DIMM
type
DDR3 synchronous DRAM
Supports data rate 1066/1333 MT/s
Supports SO-DIMM
package
204-pin SO-DIMM
Memory module
combinations
You can install memory modules in any combination as long as they match the above
specifications.
Item Specification