Packard Bell NS1 1HR Laptop User Manual


 
www.packardbell.com
73
Replacing the processor
Tools you need to complete this task:
Additional materials you need to complete this task:
Soft cloth and isopropyl alcohol; or alcohol pad
Thermal grease
Screws removed during this task:
3 black M2.5×6 (bay cover)
1 black M2×3 (hard drive)
1 black M2.5×6 (optical drive)
5 black M2×3 (keyboard frame - top base side) - Indicated
by A in step 8 of the “Replacing the keyboard” procedure on page 53
13 black M2.5×6 (keyboard
frame/palm rest module - base side) - indicated by B in step 8 of the
“Replacing the keyboard” procedure on page 53
1 black M2×3 (system board)
To replace the processor:
1 Complete the steps in “Preparing the notebook” on page 37.
2 Remove the system board by performing steps 1 15 of the “Replacing the
system board” procedure on page 67.
3 Remove the cooling assembly by performing steps 4 7 of the “Replacing
the cooling assembly” procedure on page 70.
4 Remove the barcode sticker on top of the processor.
Phillips #0 screwdriver
Flat screwdriver Non-marring plastic scribe